Go Back
AIRV6 Hakrc F7 F722 V2 SE Flytower 2-6S 65A X4 ESC 32-bit Brushless Speed Flight Controller 30.5mm S
$78.00
Precautions:
▶The flight controller has many integrated functions and dense components. When installing, please do not use tools (such as needle nose pliers or sleeves) to screw the nut, as it may scratch the fly tower hardware and cause unnecessary losses. The correct way is to press the nut with your finger and use the screwdriver to quickly tighten the screw. (Do not tighten too much to avoid damaging the PCB).
▶Do not install propellers when installing and debugging the flight controller, and try not to test the flight indoors to avoid safety accidents. Before installing the propeller for a test flight, please check again whether the motor steering and the direction of the propeller are correct. Safety Tips: Do not fly near crowds. The company is not responsible for any losses caused by the crash of the aircraft.
...
Quantity
Coming soon
More Details
Precautions:
- The flight controller has many integrated functions and dense components. When installing, please do not use tools (such as needle nose pliers or sleeves) to screw the nut, as it may scratch the fly tower hardware and cause unnecessary losses. The correct way is to press the nut with your finger and use the screwdriver to quickly tighten the screw. (Do not tighten too much to avoid damaging the PCB).
- Do not install propellers when installing and debugging the flight controller, and try not to test the flight indoors to avoid safety accidents. Before installing the propeller for a test flight, please check again whether the motor steering and the direction of the propeller are correct. Safety Tips: Do not fly near crowds. The company is not responsible for any losses caused by the crash of the aircraft.
- Do not use non-original aluminum columns or nylon columns to avoid damage to the flight control hardware.
- Before powering on the aircraft, please check whether the installation between the plugin of the tower is correct (the pin header or cable must be aligned and installed), check whether the positive and negative poles of the welding are correct, and check whether the motor screws are against the motor stator to avoid short circuits.
- Check for any solder thrown onto the electronic components of the flying tower, which may cause a short circuit. If a short circuit occurs during the installation of soldering, the buyer shall be responsible for it.
Specifications:
- Flight Tower Net Weight: 23.5g
- Package Weight: 71.5g
- Packing Size: 646435mm
Flight Controller Specifications:
- Size: 36x36mm
- Net Weight: 8.5g
- Mounting Hole Spacing: 30.5*30.5mm ф4mm
- Processor: STM32F722RET6
- Gyroscope: ICM42688 dual gyroscope
- BEC: 5V/3A; 10V/2.5A
- Memory: 16MB
- Input Voltage: 2-6S
- Firmware: HAKRCF722V2
- Uart Serial Port: 6 pcs
- Comes with four programmable color LEDs
- Comes with a 6p sky terminal seat
ESC Parameters:
- ESC Size: 40mm43mm6.5mm
- Net Weight: 12.5g
- Fixed Hole Spacing: 30.5mm*30.5mm ф4mm
- Continuous Current: 65A
- Maximum Current: 75A (Sustainable 10S)
- Input Voltage: 2-6S
- Current Ratio: 160
- Supports ESC telemetry data image transmission
- Assistant Software: BLHeliSuite16.7.14.9.0.3
- Support Protocols: PWM, Oneshot125, Oneshot42, Multishot, Dshot150, Dshot300
